Olimpia splendid Bi2 - Technical Data and Compatibility; Wireless Communication Protocol Details

KIT WIRELESS Bi2 - B1130
EN - 3
ENGLISH
• This unit complies with the European directives
• ETSI EN 301 489-1 V2.2.3:2019
• ETSI EN 301 489-17 V3.2.4:2020
• ETSI EN 300 328 V2.2.2:2019
• The simultaneous use of this appliance next to other radio frequency
appliances may compromise the quality of the transmitted/received
signal until the communication is interrupted.
• The device uses a non-harmonized frequency and is conceived to be
used in European countries; for the use restrictions of this equipment,
refertothespecicstandardsinforceforeachcountry.
• In the countries part of the EU, the WLAN can therefore be used
indoors without any restriction, but in Frnace it cannot be used out-
doors.
•Changesormodicationsnotexpresslyapprovedbythepartyre-
sponsible for conformity may nullify the authorization of the user to
use the equipment.
• Check compatibility of the device used with the OS Smart System
app in the list on the digital stores.
OLIMPIA SPLENDID is not responsible for any problem deriving from
the incompatibility.
2 - TECHNICAL DATA
2.1 - WIRELESS COMMUNICATION PROTOCOL
Operating frequency band ..................................from 2,412 GHz to 2,484 GHz
Maximum transmitted power ...............................19,5 dBm
Communication standard ....................................IEEE 802,11 b/g/n
Antenna...............................................................Integrated in the PCB