ENGLISH
EN - 26
When the delay time set has elapsed, the overall unit switches OFF.
c. To cancel the delayed shutdown, press button B8 again until a value of 0 is set.
d. When the timer is active, symbol S2 is activated on the machine and symbol 8 on the remote control.
3.11 - SETTING THE UNIT OF MEASUREMENT OF TEMPERATURE
On pressing buttons SW3 SW4 simultaneously for 3 seconds you can change the temperature unit of
measure indicated on the machine display from CELSIUS (°C) to FAHRENHEIT (F) and vice versa.
3.12 -AUTORESTART
In case a black-out occurs, the appliance stores the former function mode and start up again when re-pow-
ered by recovering all previous settings.
4 - MAINTENANCE AND CLEANING
Before proceeding with any maintenance and cleaning
intervention, always make sure you disconnected the
powerplugfromthepowersocket.
Donottouchthemetalpartsoftheappliancewhenyou
removethelter.
Thereisariskofinjuryduetothesharpmetaledges.
Do not use water to clean the internal parts of the air conditioner.
Exposuretowatercanruintheisolation,withtheriskofelectricshocks.
4.1 - CLEANING
4.1.a - Cleaning the appliance and the remote control
a. Use a dry cloth to clean the appliance and the remote control.
b. It is possible to use a cloth moistened with cold water to clean the appliance in case it’s very dirty.
Donotuseachemicallytreatedorantistaticclothtocleantheappliance.
Donotusegasoline,solvent,polishorsimilarsolvents.
Theseproductscouldcausethebreakageordeformationoftheplasticsurface.