ENGLISH
EN - 20
2.5 - ELECTRICAL CONNECTION
Before connecting the air conditioner ensure that:
appliance plate data.
omnipolar disconnection device compliant with national installation
regulations.
CAUTION
-
2.6 - DRAINAGE
Depending on the modality of use of the appliance, it is necessary to connect the condensation discharge pipe.
For the correct use of the appliance, work as follows (
):
a. Remove the cap (24).
b. Insert a pipe (8) in the connector.
3 - USE OF THE APPLIANCE
The functioning modes if the air conditioner can be selected both through the remote control and through the
control panel located on board of the air conditioner.
To Next Page
Loading...
