DOLCECLIMA
ENGLISH
EN - 33
4.2.b Error codes
During the appliance functioning, a few anomalies which stop its functioning could appear.
In these cases, some error codes appear on the control panel.
Lower tray full.
Empty it by operating as described in paragraph 4.2.a
-------------------------------------------------------------------
Filters cleaning.
Message F1 appears every 250 hours of operation of the fan motor.
keeping key “ON/OFF” on the appliance control panel pressed for 5 seconds.
-------------------------------------------------------------------
Environment temperature sensor error.
Evaporator temperature sensor error.
Condenser temperature sensor error
Display panel communication error.
In these cases:
a. electrically disconnect the appliance
b. wait a few minutes
c. connect the plug to the power socket
d. restart the appliance.
appliance and refer to an Assistance Centre.
5 - TECHNICAL DATA
For the technical data, please consult the data plate applied to the product (Fig.2).
460 x 767 x 395 mm
29 Kg
in cooling mode
(Maximum operating temperature
in heating mode)
DB 35°C - WB 24°C * / DB 43°C - WB 32°C **
DB 27°C - WB 19°C * / DB 27°C - WB 19°C **
in cooling mode
(Minimum operating temperature
in heating mode)
16°C * / 16°C **
DB 7°C * / DB 7°C **
* Internal ambient temp.
** Outside ambient temp.
To Next Page
Loading...
