completely and the phone powers itself off,
after receiving sufficient charge, the phone
will not automatically power back on. It
needs to be powered on by pressing and
holding the end call key for 5 seconds.
No network coverage
• If the chip on the SIM card is dirty or
damaged it can impact the phone’s
ability to read the SIM card. Please
clean/replace as required.
• Please ensure the SIM card is installed
in accordance with the instructions
provided in this manual.
• Please ensure the SIM does not extend
beyond/is not pushed too far in the SIM
slot.
Failure to connect to network
• The network signal may be weak/out of
range. Try changing locations to see if
the signal improves.
• The SIM card/network may be
invalid/inactive. Please contact your
network service provider.
Failure to make an outgoing call
• Please ensure you are entering a
To Next Page
Loading...
