797-32C BREAD SLICER
0797S20091 4-3
NOTE
OPTIONAL OUTFEED TABLE GUIDES ARE ADJUSTED WITH HAND
PRESSURE IN A FASHION SIMILAR TO THAT OF THE INFEED GUIDES.
AS WITH THE STANDARD OUTFEED TABLE ALIGN THE OUTFEED
GUIDES WITH THE INFEED GUIDES.
Operating a Gravity Feed Slicer
Once the slicer has been properly adjusted for the product, the infeed chute may be
loaded with the product to be sliced. Flipping the starting switch to the ON position will
begin operation. Remove each sliced product from the discharge table as it is sliced.
To Next Page
Loading...
