797-32C BREAD SLICER
0797S20090 3-1
INSTALLATION INSTRUCTIONS
Removing the Slicer from the Shipping Skid
After removing the carton you should find the basic slicer completely assembled and
strapped to the shipping skid. Cut both straps to free the slicer from the skid.
CAUTION
THE SLICER IS HEAVY, USE PROPER TECHNIQUE WHEN LIFTING.
KEEP BACK STRAIGHT, KNEES BENT, AND LIFT WITH LEGS.
USE GLOVES TO PROTECT HANDS.
As shown in the illustration below, lift the slicer off the shipping skid with one person
standing on each side of the slicer. Set the slicer down on a level floor after which it may
be moved to the desired location.
To Next Page
Loading...
