72
APPENDIX
* First copy out time is measured with original on the document glass in full ready condition with fuser at operating temperature
and mirror motor at operating speed, actual time may vary based on environment conditions.
Printer Function
* Print speed during printing of the second sheet and following sheets when using A4 (8-1/2" x 11") plain paper and performing
continuous one-sided printing of the same page.
Overall dimensions
(with bypass tray folded)
590 mm (W) x 577 mm (D) (23-15/64" (W) x 22-23/32" (D))
Weight
Approx. 31.3 kg (69.1 lbs.)
(Not including toner cartridge)
Approx. 36.3 kg (80.1 lbs.)
(Not including toner cartridge)
Dimensions
590 mm (W) x 577 mm (D) x 470 mm (H)
(23-15/64" (W) x 22-23/32" (D) x 18-33/64" (H))
590 mm (W) x 577 mm (D) x 555 mm (H)
(23-15/64" (W) x 22-23/32" (D) x 21-55/64" (H))
Operating conditions Temperature: 15°C to 30°C (59°F to 86°F), Humidity: 20% to 85%
Noise level
Sound Power Level L
wA(1B=10dB)
Copying: 6.2[B] or less
Standby: 3.1[B] or less
Noise emission measurement in accordance with ISO 7779.
Emission concentration
(measured according to
RAL-UZ62: Edition Jan.
2002)
Ozone: 0.02 mg/m
3
or less
Dust: 0.075 mg/m
3
or less
Styrene: 0.07 mg/m
3
or less
Print speed*
d-Copia 2001 Max. 20 ppm / d-Copia 1601 Max. 16 ppm
(Dual function board must be installed)
Resolution 600 dpi
Memory 16 MB
Emulation
SHARP GDI/SPLC (Sharp Printer Language with Compression, dual function board
must be installed)
Memory expansion
Up to 256 MB can be only added by installing a 256 MB optional memory (AR-SM5)
in one DIMM expansion slot (dual function board must be installed)
Interface connector
IEEE1284 parallel connector/
USB connector (USB1.1), USB connector (USB2.0, dual function board must be
installed)
Interface cables
[Parallel cable]
Shielded bi-directional (IEEE1284) cable (max. length 3 m (10 feet))
Please purchase a commercially available parallel cable.
[USB cable (only for connection to USB 1.1 connector)]
Shielded twisted pair cable (max. length 3 m (10 feet))
[USB cable (only for connection to USB 2.0 connector)]
Shielded twisted pair cable (max. length 3 m (10 feet), must support USB 2.0)
Please purchase a commercially available USB cable.
As a part of our policy of continuous improvement, OLIVETTI reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Note
To Next Page
Loading...
