EasyManua.ls Logo

Olivetti d-Copia 201D - User Manual

Olivetti d-Copia 201D
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Code 546106en
GB
d-Copia 200D
d-Copia 201D
OPERATION MANUAL
DIGITAL MULTIFUNCTIONAL
SYSTEM

Table of Contents

Other manuals for Olivetti d-Copia 201D

Questions and Answers

  • C
    Christina BradleyAug 13, 2025
    Why does my Olivetti All in One Printer paper misfeed frequently?
    • B
      benjaminjonesAug 13, 2025
      Frequent paper misfeeds in your Olivetti All in One Printer can occur due to several reasons: non-standard paper being used (use standard paper, or feed special papers through the multi-bypass tray), paper that is curled or damp (store paper flat in the wrapper in a dry location), pieces of paper inside the unit (remove all pieces of misfed paper), paper guides in the paper tray not set properly (set the guides properly depending on the paper size), or too much paper in the paper tray or multi-bypass tray (remove excessive paper from the tray).
  • S
    Shawn JosephAug 17, 2025
    What to do if my Olivetti d-Copia 201D All in One Printer copies are too dark or too light?
    • R
      Ryan OsborneAug 17, 2025
      If your Olivetti All in One Printer produces copies that are too dark or too light, it could be due to several factors. If the original image is too dark or light, adjust the exposure manually. If the unit is in automatic exposure mode, adjust the automatic exposure level. Alternatively, if the unit is in photo exposure mode, cancel the photo exposure mode.
  • B
    barbara33Aug 21, 2025
    Why does my Olivetti d-Copia 201D All in One Printer unit not operate?
    • P
      Patricia TaylorAug 21, 2025
      If your Olivetti All in One Printer is not operating, check the following: Ensure the unit is plugged into a grounded outlet. Verify that the power switch is turned on. Make sure the side cover is closed securely. Confirm the front cover is closed, and then close the side cover.
  • D
    Dustin PetersAug 25, 2025
    Why do dust, dirt, smudges appear on Olivetti d-Copia 201D copies?
    • M
      Megan ChristensenAug 25, 2025
      Dust, dirt, or smudges on copies from your Olivetti All in One Printer can be caused by a dirty document glass or SPF (clean regularly) or a smudged or blotchy original (use a clean original).
  • C
    Carly GriffinAug 28, 2025
    What to do if images rub off easily from Olivetti d-Copia 201D copies?
    • T
      Timothy HesterAug 28, 2025
      If images rub off easily from copies made with your Olivetti All in One Printer, the paper might be too heavy (use paper within the specified range). Another cause might be that the fusing temperature is not appropriate. In the user programs, set "Fusing temperature setting when the bypass tray is used" (program 29) to "2 (High)". Also, check if the paper is damp and replace it with dry paper. If the unit is not used for a long time, remove the paper from the paper tray and store it in its wrapper in a dry location.
  • L
    Linda HardinAug 31, 2025
    Why does my Olivetti d-Copia 201D produce blank copies?
    • S
      Sherry YoungSep 1, 2025
      Blank copies from your Olivetti All in One Printer may result from the original not being placed correctly (place the original face down on the document glass or face up in the SPF) or the scan head locking switch being locked (unlock the scan head locking switch).
  • K
    Kyle ThompsonSep 5, 2025
    How to fix striped copies from my Olivetti d-Copia 201D All in One Printer?
    • T
      Tyrone MartinSep 5, 2025
      Striped copies from your Olivetti All in One Printer can be caused by a dirty transfer charger. Clean the transfer charger to resolve this issue.
  • A
    Aaron WaltonSep 8, 2025
    Why is printing not uniform between the edges of the paper and the center on my Olivetti d-Copia 201D?
    • V
      Vanessa JonesSep 8, 2025
      If the printing is not uniform between the edges of the paper and the center on your Olivetti All in One Printer, the fusing temperature may not be appropriate. In the user programs, set "Fusing temperature setting when the bypass tray is used" (program 29) to "1 (Low)".

Olivetti d-Copia 201D Specifications

General IconGeneral
FunctionsPrint, Copy, Scan
Print TechnologyLaser
Print Speed (Black)20 ppm
Print Resolution600 x 600 dpi
ConnectivityUSB 2.0
Copy Speed20 cpm
Scan Resolution600 x 600 dpi
Automatic Document FeederNo
DisplayLCD
Duplex PrintingManual
Paper SizeA4, A5, A6, B5, Letter, Legal
Copy Resolution (Black)600 x 600 dpi
Scan TypeFlatbed
TypeAll-in-One Printer
Paper Capacity250 sheets
Operating System CompatibilityWindows, Linux

Related product manuals