10
INSTALLING THE TONER/DEVELOPER CARTRIDGE
1
Open the multi-bypass tray,
and then open the side
cover.
2
Push gently on both sides of the
front cover to open the cover.
3
Remove the toner/developper cartridge from the bag. Remove the
protective paper. Hold the cartridge on both sides and shake it
horizontally four or five times. Hold the tab of the protective cover
and pull the tab to your side to remove the cover.
4
Gently insert the toner/
developper cartridge until it
locks in place while pushing the
lock release button.
4 or 5 times
Lock release button
To Next Page
Loading...
