Olivetti d-COPIA 3014MF - Background Density

5-24
Sending Functions
Background Density
Removes dark background from originals, such as newspapers.
If the ground color is obtrusive, select [Auto]. If [Auto] does not remove the ground color, select [Manual] and adjust
the density of the ground color.
The setting items are as follows.
The procedure for adjusting the background density of copies is explained below.
1 Press the Send key.
2 Place the originals in the document processor or on the
platen.
3 Press the Function Menu key. Function Menu appears.
4 Press the  or  key to select [Background Density].
5 Press the OK key. Background Density appears.
6 Press the  or  key to select [Off], [Auto] or [Manual].
7 Press the OK key.
When [Manual] is selected, Manual appears. Press the
 or  key to select [1 (Lighter)] to [5 (Darker)] and then
press the OK key.
Completed. is displayed and the screen returns to the
basic screen for copying.
8 Press the Start key to start sending.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
Item Description
Off Does not adjust the ground color.
Auto Automatically adjusts the background density based on the original.
Manual Manually adjust the density in 5 levels. When [Manual] is selected, press [1 (Lighter)] to
[5 (Darker)] to adjust the background density.
Function Menu: a b
*********************
2 Original Size T
3 Original Image T
[ Exit ]
1 Color Selection T
Background Density: a b
*********************
2 Auto
3 Manual
1 *Off
Manual: a b
3 3
4 4
*********************
5 *5 (Darker)