8-106
Default Setting (System Menu)
Registering Destination
1 In the Destination menu, press the or key to select
[Reg
ister].
2 Press the OK key. Register appears.
To select a destination from the address book, press the
or key to select [Address Book] and then press the
OK key. This displays the address book. Select your
desired destination.
NOTE: For selecting a destination from the address book,
refer to Specifying Destination on page 3-25.
To directly enter a destination, press the or key to
select [Address Entry] and then press the OK key. This
displays an entry screen. Enter the destination address
directly.
3 Press the OK key. Completed. is displayed and the
scr
een returns to the Destination menu.
NOTE: If the address of the selected destination has been
changed after you selected the destination from the address
book, [*] is displayed before [Address Entry]. Refer to
Confirming Current Destination on page 8-105 and
reconfirm the destination address.
To Next Page
Loading...
