Olympia CM 1810 plus - Page 4

Quick Reference CM 1810 plus
plusplus
plus Cash Register (13)
Olympia 08.2002 Page 4 Rights to make technical changes reserved!
Programming Flags
The basic cash register program is stored in Flags.
Print Flags: The programs can be printed.
BR
Program Flags: e.g. Flag 07, time
7B
E.g. 1030
N
P
Open the basic program Flag 7 (Time)
Enter time
Store and move to next Flag
Conclude programming
FLAG 01 Tax rate - Date format - Decimal places
32
= Recommended setting
0 = Net price (excluding tax);
Date (MM-DD-YY)
1 = Net price (excluding tax);
Date (DD-MM-YY)
2 = Gross price (including tax);
Date (MM-DD-YY)
3 = Gross price (including tax);
Date (DD-MM-YY)
0 = No decimal places
1 = One decimal place
2 = Two decimal places
3 = Three decimal places
FLAG 02 Electronic journal/Price rounding
01
= Recommended setting
0 = No journal
1 = LINE: Only registrations are stored; journal must
be printed before Z-reports
2 = CUS: All registrations, totals and headers are
stored; journal must be printed before Z-reports
3 = LINE: Only registrations are stored
4 CUS: All registrations, totals and headers are
stored
0 = Paper reel motor switched off
1 = Paper reel motor switched on
FLAG 03 Tax rounding
0
= Recommended setting
0 = Standard 5/4 rounding
(1.114 = 1.11) (1.115 = 1.12)
1 = Absolute rounding up (1.111 = 1.12)
2 = Absolute rounding down (1.119 = 1.11)
FLAG 04 Receipt header display
0
= Recommended setting
0 = Machine no., Receipt no., Clerk, Date, Time
1 = Date, Time
2 = Machine no., Receipt no., Clerk, Time
3=Time
4 = Machine no., Receipt no., Clerk, Date,
5=Date,
6 = Machine no., Receipt no., Clerk
7 = No header
FLAG 05 Representation of Z-reports
0
= Recommended setting
Reset receipt no. after Z-report
0 = All report information is printed
1 = Grand Total is not printed
2 = Consec. Z-report no. is not printed
3 = Grand Total + report no. are not printed
No receipt no. reset after Z-report
4 = All report information is printed
5 = Grand Total is not printed
6 = Consec. Z-report no. is not printed
7 = Grand Total + report no. are not printed
FLAG 06 Date
20062001
= E.g. 20 June 2001
= (DD-MM-YYYY)
FLAG 07 Time
1430
= E.g. 14:30 (hour:minute)
FLAG 08 Consecutive machine number
00
= Recommended setting
Numbers from 00 to 99 are possible
FLAG 09 Multi-function flag
1013
= Recommended setting
0 = Self-test: no
1 = Self-test: yes
0 = Not compulsory to enter the change
1 = Compulsory to enter the change
0 = 20 departments; 2nd level activated
1 = 10 departments; 2nd level deactivated
3 = Receipt paper feed
(entry of 0 to 9 lines is possible)
FLAG 10 Consecutive receipt no.
0001
= Enter a 4-digit code between 0 and 9999
FLAG 11 to FLAG 25 Clerk code for 1 to 15 clerks
0001
= Enter a 4-digit code between 0 and 9999
FLAG 26 Fixed premium percentage
1050
= Example for 10.5% (surcharge); always enter
a 4-digit number without decimal point
FLAG 27 Fixed discount percentage
0250
= Example for 2.5% (discount); always enter
a 4-digit number without decimal point