Configuration
G
18
After having entered phone numbers, ensure that they are correct in respect of the alarm
calls. You can do this by triggering a silent alarm. The telephone numbers you have en
tered are dialled in succession in the programmed sequence.
1. Enter the Entry Code. Confirm it by pressing .
2. On pressing the key, Silent mode is activated. Silent mode is indicated in
the display by the icon after the selected armed delay has expired.
3. Now trip the silent alarm on any of the door/window contacts (e.g. open door/win
dow).
NOTE: When Silent mode is active, there is no acoustic alarm
signal. The display lights up yellow and indicates which
sensor has been triggered. The internal telephone di
alling unit is activated after the trigger delay has expired.
· The subscriber called takes the call and the individual message recorded for the
sensor triggered is played.
· The subscriber called is also requested to press digit key [1] on their telephone.
The screening function is activated. This function enables the subscriber to screen
the room in which the base unit is located.
· If the subscriber called does not initiate a function within 24 seconds, the next
phone number is automatically dialled.
· Silent mode is deactivated by pressing the button on the remote control,
entering your Entry Code on the base unit and confirming by pressing the
button or when the subscriber called ends the call.
Saving an SOS (Emergency Call) Number
You can save an SOS (emergency call) number which is subsequently called first by press
ing the button on the base unit or, depending on the configuration, the
button on the remote control. Following this number, the other phone numbers stored,
maximally 10, are called in succession (refer to "Activating the Internal Telephone Dialling
Unit with OGM" function).
Save the SOS number as follows:
NOTE: Do not use the official emergency call numbers (e.g. 112)!
NOTE: Unjustified requests for police, fire and rescue services
are liable for costs!
1. Enter the Entry Code. Confirm it by pressing .
2. Press the button. Location Key appears in the display.
3. Press the button as the selected memory location. If you have not yet
stored a phone number, Empty appears as information in the display. Confirm it by
pressing .
4. Enter the phone number including the access code. Confirm it by pressing
.
5. Enter the name associated with the phone number. Confirm it by pressing .
6. Press to exit from the menu.
To Next Page
Loading...
Need help?
General
