Olympia Protect 6 Series User Manual

Resetting the Factory Settings (RESET)
G
25
Key Function
[1] Activate the handsfree function
[2] Activate the screening function (in the room)
[3] Activate Alarm mode
[4] Activate At Home mode
[5] Activate Silent mode
[6] Activate Disarmed mode
[#] End the handsfree or screening function
[#], [#] End remote access via telephone facility
6. Remote access to your alarm system is interrupted when you press the [#] button
twice on your telephone.
Resetting the Factory Settings (RESET)
NOTE: Please note that when carrying out a RESET, all the user
settings are deleted. The registration of the sensors is
retained! After a RESET has been executed, the 4-digit
Entry Code is 1-2-3-4!
Proceed as follows to reset the factory settings on the wireless alarm system:
1. Use a screwdriver to loosen the screw in the battery and connection socket compart
ment on the underside of the base unit.
2. Press the RESET button. The alarm system acknowledges a RESET by means of
an acoustic signal.
3. Close the battery and connection socket compartment and tighten the screw.

Olympia Protect 6 Series Specifications

General

Brand	Olympia
Model	Protect 6 Series
Category	Security System
Language	English