Complete Teardown, Cleaning, and Reassembly of the Olympus BH-2 Coaxial Focus Mechanism Revision 4 Page 1 of 40
Complete Teardown, Cleaning,
and Reassembly of the Olympus
BH-2 Coaxial Focus Mechanism
Revision 4
Copyright © 2017, 2018, 2021 Carl Hunsinger
All rights reserved. This document may not be reproduced or distributed, in whole or in part, for any commercial
purpose without the express written consent of the author (carlh6902@gmail.com). Permission is hereby granted to
distribute this PDF document in its entirety for personal, non-commercial purposes only, provided that the contents are
not modified in any way, including the copyright notices contained herein. This document may be freely distributed on
WWW, FTP, or BBS sites in accordance with these restrictions. The content of this document is provided for
informational purposes only, with no expressed or implied warranties whatsoever, including, but not limited to,
function, suitability, safety, accuracy, or completeness of information.
Clarified hardware and tool types, revised method to clear setscrew heads of adhesive, added SHC220 grease option, revised
spring pre-loading procedure, and improved text readability of images.
To Next Page
Need help?
General
