To Next PageTo Next PageHow to fix an Olympus BX53 when the bulb does not light?
If the bulb of your Olympus Microscope doesn't light, first replace it, keeping in mind there may be a wire disconnection in the terminal section even if the filament looks normal. If that doesn't work, check if the power cord is properly plugged into the power outlet.
Why does the Olympus Microscope bulb intermittently light and go out?
If the bulb of your Olympus Microscope intermittently lights and goes out, it may be nearly burned out, so replace it. Also, check all connectors to ensure they are properly connected.
Why is the coarse adjustment knob hard to turn on my Olympus BX53 Microscope?
If you're having trouble turning the coarse adjustment knob on your Olympus Microscope, it might be because the tension adjustment ring is too tight. Try loosening the ring. Also, ensure the pre-focusing lever is unlocked if you're trying to raise the stage without using the coarse adjustment knob.
Why is one side of the image blurred on my Olympus BX53 Microscope?
If one side of the image appears blurred on your Olympus Microscope, ensure the objective is correctly engaged in the light path and that the revolving nosepiece clicks into place correctly. Also, check that the revolving nosepiece and stage are correctly mounted, and that the specimen is correctly placed and secured on the stage.
Why does the image appear to waver on my Olympus BX53 Microscope?
If the image in your Olympus Microscope appears to waver, ensure the revolving nosepiece is correctly mounted and that it clicks into place correctly. Also, check that the condenser is properly centered.
What causes the stage to drift down on my Olympus BX53 Microscope?
If the stage of your Olympus Microscope drifts down by itself or the focus is lost during observation, try tightening the tension adjustment ring.
How to remove dirt from the field of view on my Olympus BX53?
If you notice dirt or dust in the field of view of your Olympus Microscope, thoroughly clean the eyepiece.
Why is the field of view obscured on my Olympus BX53?
If the field of view of your Olympus Microscope is obscured or not evenly illuminated, ensure the light path selector knob is set correctly for your observation method and that the revolving nosepiece clicks into place properly. Also, check that the condenser is correctly attached and centered, and that you're using a condenser appropriate for your objective. Adjust the field iris diaphragm to an optimum size and ensure the bulb is mounted correctly.
Why is the field of view dark on my Olympus BX53 even when the bulb is on?
If the field of view of your Olympus Microscope remains dark even when the bulb is operating, check that the aperture and field iris diaphragms are opened wide enough and adjust them to the proper sizes. Also, adjust the condenser height and make sure the light path selector knob is in the correct position.
Why does the image look reddish on my Olympus Microscope?
If your Olympus Microscope image looks reddish, engage the LBD filter in the light path.
General| Type | Upright Microscope |
|---|---|
| Illumination | LED |
| Focus | Coarse and fine focus |
| Observation Tube | Trinocular |
| Observation Methods | Brightfield, Darkfield, Phase Contrast, Fluorescence, DIC |
| Magnification Range | Depending on the objectives used |
| Objective Turret | 5 or 6 positions |
| Condenser | universal condenser |
| Power Supply | AC 100-240V, 50/60 Hz |
| Stage | Rectangular Ceramic-Coated Stage with Slide Holder |
