Useful functions
6
116
Pixel mapping
The Pixel Mapping feature allows the camera to check and adjust the CCD
and image processing circuit automatically.
It is not necessary to operate this function frequently. Approximately once a
year is recommended. Wait a few minutes after the monitor is used or
continuous shots are taken to allow for proper performance of the Pixel
Mapping function.
1
Display the top menu in the shooting
mode.
• Open the lens barrier fully.
•Press .
2
Press to select MODE MENU.
3
Press to select the SETUP
tab, then press .
4
Press to select
PIXEL MAPPING, then press .
5
Press .
A bar is displayed showing the progress of
pixel mapping. When pixel mapping is
finished, the camera returns to the mode
menu.
• If you accidentally turn the camera off during pixel mapping, start
again from Step 1.
• Do not remove the batteries or disconnect the AC adapter while pixel
mapping is in progress as this may cause a malfunction.
CARD
SEtUP
CAM
PIC
ALL RESEt
REC VIEW
FILE NAME
PIXEL MAPPING
CARD
SEtUP
CAM
PIC
ALL RESEt
REC VIEW
FILE NAME
PIXEL MAPPING
StARt
To Next Page
Loading...
