Turning the power on/off
Getting started
1
23
What to do if the CARD SETUP screen is displayed
When the power is turned on, the camera checks the card automatically. If the
card in the camera has to be formatted, the following screen appears.
Note that all existing data stored on the card is erased when the
card is formatted.
To turn the camera off To format the card
Press on the arrow pad to
select POWER OFF, then press
the (OK/Menu) button.
The camera turns off.
Press on the arrow pad
to select FORMAT and press
the (OK/Menu) button.
Then select YES and press
again to start formatting.
Formatting starts. If the card was
successfully formatted, the camera
is ready to take pictures.
POWER%OFF
FORMAt
CARD%SEtUP
SELECt
GO
POWER%OFF
FORMAt
CARD%SEtUP
SELECt
GO
YES
NO
CAUtION ERASING%ALL
SELECt
GO
FORMAt
To Next Page
Loading...
