Zooming in on a subject (Optical zoom/Digital zoom)
Shooting basics
2
53
6
Press the zoom lever toward .
• The white section of the zoom indicator indicates the optical zoom. If
the digital zoom is set to ON, a red section appears on the zoom
indicator. When you reach the limit of the optical zoom, the digital
zoom is enabled.
• Pictures taken with the digital zoom may appear grainy.
• Camera movement is likely to occur at higher magnifications.
Stabilize the camera with a tripod, etc. to avoid camera movement.
• Turning the monitor off cancels the digital zoom. However, when the
digital zoom is set to ON, it will be automatically enabled the next
time you turn the monitor on.
You cannot use the digital zoom in Self-Portrait mode.
The bar moves on the zoom
indicator according to the
zoom magnification.
To Next Page
Loading...
