14 En
En
J SELECTING A LANGUAGE
1
Slide the power switch to , pressing and holding the
lock button.
• The camera turns on in the shooting mode.
• The lens extends and the monitor turns on.
2 Press Z .
• The top menu is displayed.
3 Press on the arrow pad to select MODE MENU.
4 Press to select the SETUP tab, and press .
5 Press to select , and press .
• The green frame moves to the selected item.
6 Press to select a language, and press Z.
7 Press Z again to exit the menu.
8 Slide the power switch to OFF.
J SETTING THE DATE AND TIME
1
Slide the power switch to , pressing and holding the
lock button.
• The camera turns on in the shooting mode.
• The lens extends and the monitor turns on.
2 Press Z .
• The top menu is displayed.
3 Press on the arrow pad to select MODE MENU.
4 Press to select the SETUP tab, and press .
5 Press to select , and press .
• The green frame moves to the selected item.
basic.book Page 14 Sunday, May 22, 2005 6:47 PM