En 9
En
J ATTACHING THE STRAP
1
Thread the short end of the
strap through the strap eyelet.
2 Thread the long end of the
strap through the loop that
has already gone through the
eyelet.
3 Pull the strap tight, making
sure that it is securely
fastened and does not come
loose.
J LOADING THE BATTERIES
1
Make sure that the power switch is located at OFF.
2 Slide the battery compartment
cover in the direction of .
• The battery compartment cover is
unlocked and opened in the
direction of
.
• Use the ball of your finger to slide
the cover. Do not use your fingernail
as this could result in injury.
Strap eyelet
Power switch
Battery
compartment cover
basic.book Page 9 Sunday, May 22, 2005 6:47 PM
To Next Page
Loading...
