What to do if my Olympus CAMEDIA C-2 ZOOM Digital Camera says 'CARD FULL'?
If your Olympus Digital Camera displays 'CARD FULL', it means there's no more space to save pictures. You should either replace the card with a new one or erase unwanted pictures. Remember to download any important images to your PC before erasing them.
How to fix 'NO CARD' error on my Olympus CAMEDIA C-2 ZOOM Digital Camera?
If your Olympus Digital Camera displays 'NO CARD', it means that the card is either not inserted or cannot be recognized by the camera. Try inserting a card or reinserting the card correctly.
What to do if I get a 'CARD ERROR' message on my Olympus CAMEDIA C-2 ZOOM Digital Camera?
If your Olympus Digital Camera displays 'CARD ERROR', it means the camera cannot record, play back, or erase pictures on the card. First, try wiping the gold contacts with a piece of cleaning paper and reinserting the card. If the problem continues, format the card. If the card cannot be formatted, it means the card cannot be used.
Why my Olympus Digital Camera does not turn on?
If your Olympus Digital Camera doesn't turn on or the function buttons aren't responding, here's what you can check: 1. Ensure the lens barrier is open to turn on the camera. 2. Make sure the batteries are loaded correctly. 3. Replace exhausted batteries with new ones. 4. Warm up cold batteries before use. 5. Operate the camera if it is in sleep mode by pressing the shutter button or zoom lever. 6. Wait until the camera dries if there's condensation inside. 7. Disconnect the camera from the PC, as it won't operate while connected.
What does 'WRItE-PROtECt' mean on my Olympus CAMEDIA C-2 ZOOM?
If your Olympus Digital Camera displays 'WRItE-PROtECt', it means writing to the card is prohibited. If you are trying to take pictures, remove the write-protect seal attached to the card.
Why is the monitor not clear on my Olympus CAMEDIA C-2 ZOOM Digital Camera?
If the monitor on your Olympus Digital Camera isn't clear, try adjusting the brightness in the mode menu. If the monitor is exposed to direct sunlight, block the sunlight with your hand.
Why is my Olympus CAMEDIA C-2 ZOOM picture too bright?
If your Olympus Digital Camera picture is too bright, and the flash was set to fill-in flash mode, select a different flash mode. If the subject was excessively illuminated, adjust the exposure compensation toward minus (-), or change the camera position.
Why is my Olympus CAMEDIA C-2 ZOOM picture too dark?
If your Olympus Digital Camera picture is too dark, make sure your fingers aren't blocking the flash. Ensure the subject is within the flash's working range and that the flash isn't set to the flash off mode. If the subject is small and backlit, set the flash to fill-in mode or use spot metering. Also, note that the sequential shooting mode may result in darker pictures, so adjust settings in the DRIVE menu.
What does 'NO PICtURE' mean on my Olympus CAMEDIA C-2 ZOOM?
If your Olympus Digital Camera displays 'NO PICtURE', it means there are no pictures on the card. You need to record pictures.
Why is my Olympus CAMEDIA C-2 ZOOM Digital Camera picture out of focus?
If your Olympus Digital Camera picture is out of focus, hold the camera correctly and press the shutter button gently to avoid camera movement. When using macro mode, ensure the subject is within the shooting range. If using the self-timer, look into the viewfinder while pressing the shutter. In low light, avoid the flash off mode, and use a tripod or hold the camera firmly. Cancel the self-portrait mode if you don't want to use it.
General| Image Resolution | 1600 x 1200 pixels |
|---|---|
| Optical Zoom | 3x |
| Digital Zoom | 2.5x |
| Display | LCD |
| Camera Type | Compact |
| Effective Pixels | 2.0 million |
| Maximum Aperture | f/2.8 |
| Aperture Range | f/2.8 - f/8 |
| ISO Sensitivity | 100, 200 |
| Storage Media | SmartMedia |
| File Formats | JPEG, AVI |
| Image Sensor | 1/2.7 inch CCD |
| LCD Screen | 1.5-inch, 110, 000 pixels |
To Next Page
