114
7
Settings
Pixel mapping
The pixel mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait at least one
minute after taking or viewing pictures to allow for proper performance of
the pixel mapping function.
Top menu [MODE MENU] [SETUP] [PIXEL MAPPING]
g“Menus” (P.17)
1 When [START] appears, press
e.
• The [BUSY] bar is displayed during pixel
mapping. When pixel mapping is
finished, the screen returns to the mode
menu.
This function lets you adjust the brightness of the monitor to make it easier
to see the image.
Top menu [MODE MENU] [SETUP] [s] g“Menus” (P.17)
Note
• If you turn the camera off during pixel mapping, start again from Step 1.
Mode dial
PIXEL MAPPING
m/ft
VIDEO OUT
START
PIC
CARD
SETUP
CAM
Monitor brightness adjustment
Mode dial
To Next Page
Loading...
