Flash shooting
39
Basic shooting functions
3
Basic shooting functions
1st curtain with red-eye reduction HSLOW1
This mode is for when you want to use slow synchronization, yet also reduce the red-
eye phenomenon, for instance, when shooting a person against a brightly lit night
background. A normal flash might make the person’s eyes red, but 1st curtain with
red-eye reduction lets you capture the background correctly and reduce the red-eye
phenomenon at the same time. 2nd curtain with red-eye reduction is not available.
1 Press the flash button.
• The flash pops up.
2 Select a flash mode by
repeatedly pressing the
#
button.
g“Direct buttons” (P.13)
• If no operation is performed for about 3
seconds, the flash mode is set and the mode
selection screen is automatically exited.
3 Press the shutter button halfway.
• In conditions where the flash will fire, #
lights (flash stand-by).
4 Press the shutter button fully to
take the picture.
Mode dial
#(flash mode) button
Flash button
0030
1/1000
To Next Page
Loading...
