87
Playback
6
Playback
Playing back movies
This function lets you play back movies. You can fast forward the movie or
play it back one frame at a time.
Select an image with n and display the top menu.
Top menu [MOVIE PLAYBACK] g“Menus” (P.17)
• The movie is played back. When playback
ends, the camera automatically returns to the
beginning of the movie and displays the
[MOVIE PLAYBACK] menu.
• To play the movie again, select [RESTART].
To return to playback mode, select [EXIT].
(
Operations during movie playback
H appears on movies that have sound
recorded. Pressing ac lets you adjust the
sound volume during playback.
a : Increases the volume.
c : Reduces the volume.
d : Each time you press the button, the
playback speed changes in the following
order: 2×; 20×; and back to 1×.
b : Plays the movie in reverse. Each time you
press the button, the playback speed
changes in the following order: 2×; 20×;
and back to 1×.
e : Pauses the movie and lets you play it back
frame by frame.
(Frame by frame playback
a : Jumps to the frame 10 frames back. If the
movie is less than 10 frames long, displays
the first frame.
c : Jumps to the frame 10 frames ahead. If the
movie is less than 10 frames long, displays
the last frame.
d :
Displays the next frame. The movie can be
played continuously by holding the button down.
b : Displays the previous frame. The movie
can be played continuously in reverse by
holding the button down.
e : Displays the [MOVIE PLAYBACK] menu.
Note
•
The card access lamp blinks while the camera is reading the movie from the card. Reading of
movies may take some time. Do not open the battery compartment/card cover while the card
access lamp is blinking. Doing so may damage the data on the card and render the card unusable.
Mode dial
MOVIE PLAYBACK
RESTART
EXIT
SELECT