Olympus CAMEDIA Master 4.1 - Correcting Image Distortion

129
Correcting distortion
Use the following procedure to correct distortion in the image.
1 Click the tool button [Image] and select [Distortion].
The edit setting panel now shows the [Distortion] dialog box.
2 Select [Auto] or [Manual].
If you select [Auto], skip to step 4.
3 Watching the preview display, drag the slider to adjust.
4 Click the [Apply] button.
The corrected image appears in the image display area.
Auto
Manual
Slider
Apply button
The [Auto] option is only
available when the image file
was produced in Exif-JPEG
format by an Olympus digital
camera.
Preview display
It may not be possible to apply
the distortion correction after
applying other editing
functions.