Olympus CAMEDIA Master 4.1 - Connecting the Camera to the Computer (Macintosh)

24
Connecting the camera to the computer (Macintosh)
Using a USB interface
Plug the larger connector marked Å of the USB cable into the USB port of the
computer, and connect the smaller connector marked ı to the camera.
Using a serial interface
Connect a serial cable to an adapter for conversion to Macintosh interface, then
connect the 8-pin connector of the cable to the printer or modem port of the
computer and the plug on the other end of the cable to the camera.
to USB port of PC
USB cable
to camera
For more details of the
camera-to-computer
connection, refer to the
operating instructions supplied
with the camera.
A B
to printer or modem
port of PC
Adaptor for Macintosh
Serial cable
to camera