139
Making a cut
You can remove unwanted sections of a movie file.
There are two ways to do this, called “outside” and “inside.”
• Outside
Removing the material from outside the start and end points of the wanted
section
• Inside
Removing a section from between specified start and end points
Use the following procedure to remove the unwanted section or sections.
1
Click the tool button [Movie] and select [Cut].
The edit setting panel now shows the [Cut] dialog box.
2
Click [Outside] or [Inside].
• Outside
Remove the material from outside the start and end points of the
wanted section
• Inside
Remove a section from between specified start and end points
3
Play the movie, and stop at the start or end frame.
Outside
Inside
Apply button
Playback slider
buttons
To Next Page
Loading...