DISASSEMBLING PROCEDURE CLV-160
(6) Remove the screw. (Front side)
Phillips screwdriver No.2 (CCUK3x4SZ x 2)
(7)
Remove the screws, and remove the power
supply unit from the chassis.
Phillips screwdriver No.2 (CUKSK3x6SZ x 2)
7.
Switch collar and pushbutton switch
(1)
Remove the switch washer, switch plate
and switch plate collar from the chassis.
(2)
Remove the screws, and remove the switch
unit from the chassis.
Phillips screwdriver No.2 (CCUK3x4SZ x 2)
8. Optical unit
(1) Remove the shield case.
Box screwdriver(5.5mm)(C6N3SZ x 7)
5-5
To Next Page
Loading...
