Olympus D-100/C-1 - Using the Self-Timer

19
 Using the Self-Timer
Operating Procedure
1. Check that the lens barrier is open.
2. Press the OK/menu button.
 The monitor shows the shooting mode
menu 1/3.
3. Select by pressing the or
arrow pad key.
4. Select “ON” by pressing the or arrow pad key.
5. Press the OK/menu button.
 Self-timer is set and the self-timer mark ( ) is
displayed on the monitor.
6. Compose the image in the monitor or viewfinder, and
then press the shutter button.
 The self-timer lamp on the front of the camera lights
for 10 seconds and then blinks for 2 seconds, after
which the shutter is released.
You can shoot images with self-timer operation. This is useful for taking pictures with
yourself included in the image. Fix the camera securely on a tripod, etc., before self-
timer shooting.
Arrow pad
OK/menu button
Shooting mode menu 1/3 screen
1/3
AUTO
OFF
OFF
OFF
END
OK
SELECT
1/3
END
OK
SELECT
AUTO
OFF
OFF
OFF
Shooting mode menu 1/3 screen
Self-timer mark
Self-timer Lamp