3
DP22/DP27
CAUTION - Electric safety -
Always use the power cord provided by Olympus.
Without using the correct power cord, the electric safety and the EMC (Electro-Magnetic Compatibility) performance of
the device cannot be assured.
Always connect the grounding terminal.
Connect the grounding terminal of the power cord and the grounding terminal of the power outlet. If the device is not
grounded, our intended electric safety and EMC performance of the device can not be assured.
Do not use the device near the source of strong electromagnetic radiation.
The proper operation may be interfered. The electromagnetic environment should be evaluated prior to operation of
this device.
In case of emergency, unplug the power cord.
In case of emergency, be sure to remove the power cord from the power cord connector on the product or from the
wall power outlet. Install the product at the location where you can reach the power cord connector or the wall power
outlet at hand to remove the power cord quickly.
Be sure to turn OFF the power of the device before connecting/disconnecting cables.
To Next Page
Loading...
Need help?
General
