EasyManua.ls Logo

Olympus CH2 Series User Manual

Olympus CH2 Series
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OLYMPUS BIOLOGICAL MlCROSCOPE
SERIES
CH2
REPAIR MANUAL
OLYMPUS
Question and Answer IconNeed help?

Do you have a question about the Olympus CH2 Series and is the answer not in the manual?

Olympus CH2 Series Specifications

General IconGeneral
TypeBiological Microscope
IlluminationHalogen lamp 6V 20W
StageMechanical stage with slide holder
FocusCoaxial coarse and fine focusing knobs
CondenserAbbe condenser (NA 1.25) with iris diaphragm
Magnification40x to 1000x
HeadBinocular or trinocular
Power SupplyAC 100-240V, 50/60Hz
Objective LensesAchromat objectives
EyepieceWF10x/18mm

Summary

OUTLINE OF THE PRODUCT

Outline of the product

Details about the product name and various model configurations.

Specifications

Technical specifications covering dimensions, weight, and components of the microscope.

DISASSEMBLING PROCEDURE

Disassembly of bottom plate of base

Steps to remove the bottom plate of the microscope base.

Disassembly of light exit unit

Steps to detach the light exit unit from the microscope.

Disassembly of condenser carrier, stage and focusing unit

Procedures for dismantling the condenser carrier, stage, and focusing assembly.

Disassembly of focusing knobs

Instructions for removing the coarse and fine focus knobs.

Disassembly of rack and pinion

Steps involved in removing the rack and pinion mechanism.

REASSEMBLY AND ADJUSTMENT

Assembling the pinion assembly

Instructions for reassembling the pinion assembly.

Assembling the upper stopper of coarse focus adjustment

Steps to install the upper stopper for coarse focus adjustment.

Assembling the coarse and fine focus adjustment unit

Guide to reassembling the coarse and fine focus adjustment mechanisms.

Assembling the condenser carrier, stage and focusing unit

Procedures for reassembling the condenser carrier, stage, and focusing components.

Assembling the light exit unit

Steps for putting the light exit unit back together.

Assembling the bottom plate of the base

Instructions for reattaching the bottom plate of the microscope base.

Perpendicularity adjustment of stage

Steps for adjusting the perpendicularity of the microscope stage.

Sensitivity adjustment of fine focus movement

Procedures for adjusting the sensitivity of the fine focus movement.

C2-CH Centering adjustment

Steps for performing the centering adjustment for the C2-CH condenser.

Related product manuals