Need help?Do you have a question about the Olympus CH Series and is the answer not in the manual?
General| Type | Biological Microscope |
|---|---|
| Stage | Mechanical stage |
| Focus | Coaxial coarse and fine focus knobs |
| Objectives | Plan achromatic objectives (4x, 10x, 40x, 100x) |
| Eyepiece | 10x widefield eyepiece (FN 20) |
| Condenser | Abbe condenser (NA 1.25) |
| Magnification Range | 40x - 1000x |
| Head | Binocular or Trinocular |
| Illumination | Built-in LED illuminator |
| Power Supply | AC adapter (for halogen or LED illumination) |
Lists standard tools required for microscope repair.
Lists specific greases used in microscope maintenance.
Lists specialized tools and jigs for specific repair procedures.
Visual breakdown of parts for microscope unit C-AA-2.
Visual breakdown of parts for microscope unit C-AA-3.
Visual breakdown of parts for microscope units C-M045, C-SS, C-CH.
Visual breakdown of parts for microscope unit C-MVR-3.
Procedure to remove the electrical base plate from the microscope stand.
Steps to remove the light exit component from the microscope.
Steps to disassemble the microscope's condenser holder.
Detailed steps for taking apart the coarse adjustment guide.
Steps for disassembling the microscope's adjustment knobs.
Steps to reassemble the microscope's coarse adjustment knob.
Steps to reassemble the coarse adjustment guide of the microscope.
Procedure to remove the left dovetail of the condenser holder.
Procedure to remove the right dovetail of the condenser holder.
Steps to remove the entire condenser holder assembly.
Detailed steps for disassembling the condenser holder components.
Steps to reassemble the microscope's stage plate.
Procedure to reassemble the pinion holder for the condenser.
Steps to correctly position the pinion assembly.
Steps to reassemble the condenser holder unit.
Procedure for reassembling the condenser height adjustment screw.
Steps to set the reassembled condenser holder unit in place.
Procedure to reassemble the right dovetail of the condenser holder.
Procedure to reassemble the left dovetail of the condenser holder.
Steps to reassemble the knob for the condenser holder.
Procedure to check the vertical movement of the condenser holder.
Steps to remove the ring from the light exit assembly.
Detailed steps for disassembling the light exit lens system.
Comprehensive steps for reassembling the C-CL light exit components.
Procedure to reassemble the C-CH unit with the microscope arm.
Steps to adjust the stage's perpendicularity in X and Y directions.
Steps to reassemble the light exit component onto the microscope.
Procedure to reassemble the electric base plate.
Method to check and adjust the fine adjustment sensitivity.
Steps to disassemble the old type CHA-F microscope model.
Steps to reassemble the coarse adjustment guide for the old type.
Steps to disassemble the East-West drive guide mechanism.
Steps to reassemble the East-West drive guide mechanism.
Steps to disassemble the North-South drive guide mechanism.
Steps to reassemble the North-South drive guide mechanism.
To Next Page
