Olympus DS-3500 - Editing Work Type Information

39
3
EN
Menu items
Menu items
Editing the Work Type information
1 Select the file for which you want to edit
the Work Type information ( ☞ P.28).
2 Select [ Work Type ] at the [ File Menu ]
screen, then press the OK/MENU button.
a
b
c
d
5 Press the + or – button on the Work Type
information screen to select the Option
Item, then press the OK/MENU button.
• The Option Item name input screen will be
displayed.
• When inputting or editing an Option Item
name, only characters recognized by the
ODMS software can be used.
a Input name display area
b Cursor
c Input position
d Keyboard window
3 Press the F2 (EDIT) button.
4 Press the + or – button to select
[ Edit Work Type ] or [ Select From Work
Type List ], then press the OK/MENU
button.
s Character selection:
+ , – , 0 , 9 button : Use these buttons to
select the character you want to input on the
Keyboard window.
s Character confirmation:
OK/MENU button : Use this button to confirm
your selection.
s Character deletion:
ERASE button : Use this button to delete a
character.
[ Edit Work Type ]:
This will take you to the Work Type
information screen and allow you to modify
the Work Type information that has been
registered for the file.
[ Select from Work Type List ]:
You can re-select Work Type from the Work
Type list.
1 Press the + or − button to select the
Work Type.
2 Press the OK/MENU button.
Work Type
information screen
Option Item name
input screen
6 Entering characters.