Olympus DS-3500 - Formatting the Card [Format]

41
3
EN
Formatting the card
Cards that have been used in non-Olympus devices,
or cards that are not recognized by the recorder,
must be formatted before they can be used with the
recorder.
1 Select [ Format ] at the [ Device Menu ]
screen, then press the OK/MENU button.
2 Press the + or – button to select
[ SD Card ] or [ microSD Card ],
then press the OK/MENU button.
Formatting the card [Format]
4 Press the OK/MENU button to confirm
[ Start ] selection.
5 Press the + or – button again to select
[ Start ] option.
3 Press the + or – button to select [ Start ]
option.
6 Press the OK/MENU button again to
initiate the formatting process.
• [ Format Done ] displays when formatting
ends.