48
4
EN
Connecting to your PC
Connecting to your PC
Note
• NEVER remove the card or disconnect the USB cable while the record
indicator light is flashing. If you do, the data will be destroyed.
Disconnecting from your PC
Windows
1 Click [ ] on the task bar located at the lower-right corner of
the screen. Click [ Safely remove USB Mass Storage Device ].
• The drive letter will differ depending on the PC being used.
2 Confirm that the record indicator light turns off before
disconnecting the USB cable.
Macintosh
1 Drag and drop the recorder’s drive icon for this recorder
displayed on the desktop to the Recycle Bin icon.
2 Confirm that the record indicator light turns off before
disconnecting the USB cable.
To Next Page
Loading...
