<;""End?
IiJFolder A
I
1112,3
\1-4
~
:Jl=
,~
How
to
begin
segment
repeat
playback
1
Play back the file for a segment repeat
playback.
2
Press the
A-Be.
button at the point you
want to start segment repeat playback.
"e:;-
End?" will flash on the display.
3
Press
the
A-Be.
button
again
at
the
position where
you
want to end segment
repeat playback.
The"
e:;-
Play" message appears, and repeat
playback will start. The recorder repeatedly
plays back the segment until the segment
repeat playback
is
canceled.
4
Press the
OK
or STOP.
Pressing the OK or STOP button will release
segment repeat playback and stop playback.
011
21
~
••
~
Ijj.
01111
c@r""iJ
~
IiJFolder A
Changing the Playback Speed
1
Press the PLAY button during playback.
Every time the PLAY button is pressed, the
playback speed will switch.
Regular Play:
Playback at normal speed.
S.
Play (slow playback):
Playback speed slows down, and
[§l~
will turn
on (default at 0.75 times
as
fast).
F.
Play (fast playback):
Playback speed becomes faster, and
Iii"
will
turn
on
(default at 1.5 times
as
fast).
Even if playback
is
stopped, the changed
playback speed will be retained. The next
playback will
be
at that speed.
Playback speeds cannot
be
switched when the
Noise Cancel function
is
turned
on.
Refer to
the instruction manual for more information.
To Next Page
Loading...
