Olympus DS-9000 - Changing the Time and Date

15
1
EN
Setting time and date [Time & date]
Setting time and date [Time & date]
Changing the time and date
If the current time and date is not correct, set it using the procedure below.
1 When the file display screen appears,
press the OK/MENU button while the
voice recorder is in stop mode.
2 Press the + or − button to select [Device
menu] tab.
[Device menu] tab
• You can change the menu display by moving
the settings tab cursor.
3 Press the OK/MENU or 9 button.
4 Press the + or − button to select
[Time & date].
5 Press the OK/MENU button.
• The following steps are the same as Step 1
through Step 3 of “Setting time and date
[Time & date]” (☞ P.14).
6 Press the F3 (EXIT) button to exit the
menu screen.