Olympus DS-9000 - Page 41

41
3
EN
Menu items
Menu items
Time & date
Setting the time and date beforehand enables
easier file management.
For details, see “Setting time and date [Time & date]”
(☞ P.14).
USB class
You can set the USB class of this recorder with a USB
connection to [Composite] or [Storage Class].
[Composite]:
In the 3 classes of Storage, USB audio and human
interface device, USB connection is possible.
While connected via USB in [Composite], the
recorder can be used as the USB speaker and the
USB microphone in addition to storage class.
[Storage Class]:
USB connection is possible in only storage class.
Reset settings
To reset the menu settings to their default values
use [Reset settings] under [Device menu], or use
the ODMS and DSS Player software.
Format
Memory cards that have been used in non-Olympus
devices, or memory cards that are not recognized by
the recorder, must be formatted before they can be
used with the recorder.
• Formatting the memory card will erase all the
stored data, including locked files.
For details, see “Formatting the memory card
[Format]” (☞ P. 4 4).
Cue/ Rev
The playback sound of Cue and Review operation
and Cue and Review speed can be set.
1 Select [Sound] or [Speed].
[Sound]:
Set the playback sound of Cue and Review to
On or Off.
[Speed]:
Set the Cue and Review speed.
2 Select the options.
When [Sound] is selected:
[On]:
Activate the playback sound of Cue and
Review.
[Off]:
Disables this function.
When [Speed] is selected:
You can adjust the Cue and Review speed
level from [Speed 1] to [Speed 5].
• Cue and Review speed level becomes faster
as the numerical value becomes larger.
Rev skip
This function reverse skips (rewinds) the file being
played back for a set amount of time and it is a
convenient way to move the playback position or
repeat playing a short phrase.
[1 second] [2 seconds] [5 seconds]
Rewinds the set amount of time and starts
playback.
Power save
By default, the recorder will enter into Power Save
mode if not used for more than 10 minutes.
[5 minutes] [10 minutes] [30 minutes] [1 hour]:
Set the length of time before the recorder will
enter into Power Save mode.
[Off]:
Disables this function.
• If any button is pressed, time count will restart.