Olympus DS-9500 - Operate the Slide Switch

17
1
EN
Operate the slide switch
Selecting folders and files
4 Press the + or – button to select the
desired file.
5 Press the OK/MENU or
9 button.
TIP
• If you move the slide switch to the PLAY ( `)
position while a file is selected in the file list,
playback begins immediately.
For DS-9000:
If the desired file is in the same folder, select it by
performing the operation of step 4*.
* A file can be selected with the operation of step 4
on the DS-9500 as well.
1 When the file display screen appears,
press the F1 (FOLDER) button while the
voice recorder is in stop mode.
• The folder list screen will be displayed.
2 Press the +, – or F1 (FOLDER) button to
select the folder.
3 Press the OK/MENU or
9 button.
4 While the file is being displayed, press
the
9 or 0 button.
Current folder and file name
NOTE
• There is no file list display function for the DS-9000.
Operate the slide switch
Slide the slide switch on the side of the recorder up
or down to perform the recording, stop, playback,
and fast-rewind operations.
You can determine the current position at a glance
even from the front because the slide switch works in
conjunction with the slide switch guide on the screen.
TIP
• If you use the ODMS software, you can change the
assignments of the NEW button and slide switch
(☞ P.47 ).
Slide switch
The place indicated large in the slide switch guide is
the current slide switch position.
POWER
ON
OFF
Recording
Stop
Playback
Fast-rewind
The figure shows
the stop position.