Olympus EVIS LUCERA JF 260V - Page 21

Chapter 3 Cleaning, Disinfection and Sterilization Procedures
17
EVIS LUCERA JF/TJF TYPE 260V REPROCESSING MANUAL
 Channel-opening cleaning brush (MH-507)
The channel-opening cleaning brush is used to brush the external surfaces of
the distal end of the endoscope, the suction cylinder and the instrument channel
port (see Figure 3.6).
Figure 3.6
 Washing tube (MH-974)
The washing tube is used to inject detergent solution, disinfectant solution, water
and alcohol into the elevator wire channel and to flush air through the channel to
expel fluids (see Figure 3.7).
Figure 3.7
Brush handle
Shaft
Brush
Connecting end
Luer port