Olympus FL-700WR - Optical slave shooting; Setting the firing angle (ZOOM); Setting the flash intensity (RATIO)

58
EN
Optical slave shooting Optical slave shooting
1
Press the #/l button. Then, turn the dial to select the # (fl ash) mode.
Press the OK button to confi rm.
2
Press the MODE button, and then turn the dial
to select the SL M mode.
MODE LEDZOOM
M
mm25
–
Off
M
1/128
RATIO
M
SL
3
Adjust the settings.
Setting the fi ring angle (ZOOM)
Press the ZOOM button to highlight ZOOM. Then, turn the dial to adjust the
setting.
• When you select A (auto), an automatic setting takes effect. The automatic
setting ranges from 12 mm to 75 mm.
• When the fl ash window is adjusted for bounce fl ash photography, you cannot
select A (auto).
• When you select M (manual), you can set a fi ring angle from 12 mm to 75 mm.
Press the OK button.
Setting the fl ash intensity (RATIO)
Press the a button to highlight RATIO. Then, turn
the dial to adjust the setting.
• You can set a fl ash ratio from 1/1 to 1/128.*
1
MODE LEDZOOM
M
mm25
–
Off
M
RATIO
M
SL
1/8
1/4
1/8
1/16
Scale display*
2
*1 You can select 1/2 EV or 1/3 EV for the adjustment
increment. (P. 60)
*2 On the scale display, t is the current selection. u is the
previous setting.
Press the OK button.