Perform the angulation operation
1. Operate the [ANGLE/LOCK] joystick carefully in the direction you want to observe.
Lock the angulation status
1. While the angulation section is bent, press the [ANGLE/LOCK] joystick to lock the angulation section.
2. Even though the angulation is locked, the angulation operation can be adjusted finely by operating
the [ANGLE/LOCK] joystick.
Record images
When using a media (SDHC card) for recording images for the very first time, format the SDHC card on this
instrument before recording images. For more details on the procedure, please refer to the instruction
manual of the IPLEX G Lite.
Record still images
1. Short-press the [FRZ/REC] button while the live screen is displayed to freeze the image.
2. Long-press the [FRZ/REC] button while the freeze screen is displayed to save the image in the folder.
Record movies
1. While the live image is displayed, long-press the [FRZ/REC] button.
2. After a still image is recorded, a movie recording confirmation dialog appears.
3. Selecting “Yes” on the LCD monitor to start movie recording.
4. To end movie recording, long-press the [FRZ/REC] button.
Playing back the recorded image
View screen
1. Short-press the [VIEW] button to display the newly recorded image.
2. Operate the [MEAS/OK] joystick to switch between images.
Thumbnail screen
1. Long-press the [VIEW] button to display the thumbnail screen.
2. Operate the [MEAS/OK] joystick to select an image and press the [MEAS/OK] joystick to display the
View screen.
5
To Next Page
Loading...
