Olympus IPLEX NX IV9635N - Removing the Scope Unit

32
Rotate the latch at the top of the main unit counterclockwise to unlock it.
Remove the scope unit.
1
2
Check that the end surface of the connector is not dirty. If it is dirty, wipe it completely
with the cotton swab provided with the lens cleaning kit.
Match the scope unit attaching tab with the main unit attaching bar, and attach the
scope unit to the main unit.
Rotate the latch clockwise to lock it.
Be sure to turn OFF the power before removing or attaching the scope unit.
Otherwise, the instrument may be damaged.
1
2
3
NOTE
 Attaching the scope unit
3-6 Removing the scope unit
1
2
2
3
Latch
1
Connector
Attaching tab
Attaching bar