92
7 Scaler measurement function
Scaler measurement measures the length of an object using the reference length value that is
preset according to a known length inside the observation image.
In other words, an accurate measurement cannot be obtained if the reference
length is incorrect. Also, the measurement is made based on the assumption
that the reference object and the object for measurement are on the same
vertical plane as the optical axis.
7-1 Measurement flow
The following shows measurement procedures and the screen flow.
Attaching the optical adapter (See page 93)
Measurement (See page 94)
Measurement screen
Measure the length.
Capturing the measurement area (See page 93)
Live screen
Observing the measurement area.
[MENU] - <EXIT
MEASUREMENT>
[LIVE]
[MEASURE]
To Next Page
Loading...
