Olympus IPLEX NX IV9635N - Requesting Repair of this Product

91
IPLEX NX
Touch panel of LCD unit Remote control unit Function
tap
[MEAS/ENTER] joystick
short-press
Switches between rotation and parallel
movement.
long-tap
[MEAS/ENTER] joystick
long-press
Changes the object for operation in
binocular view to 2D view (left image
area) or 3D view (right image area).
[MEAS/ENTER] joystick
(Joystick operation)
Rotates the 3D view or moves it in
parallel.
 Color map view
The distance to the object for measurement is displayed in color with the distal end of the stereo
optical adapter as a reference. If the reference plane is specified in depth mode, the depth (height)
with the specified reference plane as a reference is displayed in color.
The following marks are displayed at the nearest (shallowest) position and the furthest (deepest)
position on 3D view.
Mark Distal end as reference Specified reference plane as reference
Nearest position Shallowest position
Farthest position Deepest position
The values on the color chart and
positions on the color map are for
reference only. For acquiring accurate values, see “6-5 Measurement”
(page83).
TIP