Olympus IPLEX NX IV9635N - Page 49

41
IPLEX NX
By using the belt clamp, you can secure the channel port and the remote control unit attached
to the channel port grip to the side of your body.
Attach the belt clamp to a belt or pants.
Push the connection device of the channel port grip into the ring catch of the belt
clamp, until it clicks
Channel port grip
Belt or Pants
Belt clamp
Ring catch
Connection device
Confirm the channel port grip is attached firmly.
1
2
3
 Attaching the belt clamp and the channel port grip
{ Removing the belt clamp and the channel port grip
Remove the belt clamp and the channel port grip in the reverse order of the attaching
procedures.