4
LCD/Sound menu [LCD/Sound Menu]
51
EN
LCD/Sound menu [LCD/Sound Menu]
Adjusting the contrast
[Contrast]
You can adjust the contrast of the display to
12 different levels.
• The setting can be adjusted to between
[01] to [12].
Setting the LED indicator light
[LED]
You can set the LED indicator light to not
become lit.
[On]:
LED indicator light is switched on.
[Off]:
LED indicator light stays off.
TIP
• E
ven if you set the [LED] setting to
[Off], the LED indicator light will
flash while files are being transferred
between the voice recorder and a PC.
Turning beeping sound ON/OFF
[Beep]
The voice recorder makes beeping sounds
when buttons are pressed, or to warn in case
of operation errors. You can select whether
the voice recorder makes these beeping
sounds.
[On]:
Enables beeping sounds.
[Off]:
Disables beeping sounds.
Changing the display language
[Language]
You can select the language used in the voice
recorder’s displays.
• [Čeština] , [Dansk], [Deutsch],
[English], [Español], [Français],
[Italiano], [Nederlands], [Polski],
[Русский], [Svenska], [繁體中⽂].
TIP
• T
he language selections vary
depending on where the voice recorder
was purchased.
To Next Page
Loading...
