1-18
OEP-3 V1 (UC)
34
Operation
Making Variations of Printouts (Continued)
: / HIGHPRN SPEED
MOTION CHK
P
/c/ l /PRN/i /o/
RINTER SETUP
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
S
Selecting the Printer Application Mode
The unit allows you to make printouts of a full-size image, two reduced images,
four reduced images, eight reduced images and 16 reduced images.
Also by setting the printer application mode to either STANDARD or
DUPLICATE, you can make a printout of different multiple images or identical
multiple images.
When you use the printer for the first time, the STANDARD application mode for
full-size image printouts is selected.
Select the application mode according to what kind of printouts you want to make.
Note
Changing the application mode results in clearing images stored in all of the
memory pages.
i
1
Press the MENU button.
The menu previously opened appears.
2
Select PRN by pressing the G or g button.
The PRINTER SETUP menu appears.
1,11
2,4,8
3,5,7,9
6,10
Switch PRN to green by pressing the
G or g button.
Display PRN in capital letters by
pressing the G or g button.
PRN SPEED : / HIGH
MOTION CHK
S
PRESS
[
>
]
YSTEM :
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
S
/HIGH
PRN SPEED : / HIGH
MOTION CHK
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
S
P
RN SPEED :
/HIGH
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
S
PRN SPEED : / HIGH
MOTION CHK
P
RN SPEED :
3
Select PRN SPEED by pressing the F or f button.
When you use the UPC-540 Self Laminating Printing Pack (provided by Sony
Corporation), you can select the finish of the printouts. (See
“Selecting the
Lamination Pattern
” on page 121.)
4
Select the desired PRN SPEED by pressing the G or g button.
When you want to PRN SPEED
Make a printout at normal speed. NORMAL
Make a printout at high speed. HIGH
5
Select SYSTEM by pressing the F or f button.
Position the cursor at PRN SPEED
by pressing the F or f button.
Press the F or f button until
PRN SPEED appears.
Switch the desired PRN SPEED to green by
pressing the G or g button.
Display the desired PRN SPEED by
pressing the G or g button.
Position the cursor at SYSTEM by pressing
the F or f button.
Press the F or f button until
SYSTEM appears.
Continue to the next page c
To Next Page
Loading...
